User's Manual

Charging the V9 (3.7V rechargeable battery built-in)
1- Turn off V9 before charging
2- Connect V9 with PC/Laptop/Mac or any 5V USB adaptor(not included) with the USB cable
included
3- Red LED turns ON during charging, turns OFF after fully charged.
4- Unplug USB cable after fully charged, it costs about 2 hours to fully charge the speaker.
5- Red LED twinkles when low power(<21%), with indication sound.
Turn ON/OFF V9 Bluetooth speaker
1- Hold the Power button for 3 seconds to turn on the speaker, battery indicator and Bluetooth
indicator turn on at the same time.
2- Hold the Power button for 3 seconds to turn off.
Paring V9 with mobiles (Bluetooth enabled) and Tablets.
1- Please keep the speaker and mobile within 1 meter.
2- Turn on V9, blue/red LED blinks quickly, the speaker is standby for pairing.
3- Start the Bluetooth function of mobile and search the Bluetooth devices, after searched,
select “V9” in the Bluetooth device list.As per of the pairing process, you may need to enter a
passkey (0000) depending on Bluetooth version of devices.
4- After successful pairing, select “V9” in the Bluetooth device list, and press “connect”
5- After successful connecting, LED changes to solid blue.
Note:
1: If the pairing is not successful, turn off speaker and re-pair again.
2: After successful pairing, paired devices will remember each other. Unless pairing information is
deleted, no need to pair when use next time.
3: Pair with new device according to steps 1-5 above after disconnecting existing pair.
Paring V9 with iPhone, iPad
1- Please keep V9 and iPhone (iPad) in the range of 1 meter when pairing.
2- Turn on V9, blue/red LED blinks quickly, the unit is standby for pairing.
3- In iPhone (iPad) General > Bluetooth, tap on Bluetooth function, and search the Bluetooth
devices, tap V9 to connect it.
Paring V9 with PC or notebook
1- Please keep V9 and PC in the range of 1 meter when pairing.
2- Turn on V9, blue/red LED blinks quickly, the unit is standby for pairing.
3- Run Bluetooth program of your system.
4- Please use “Search new device” function in the program.
5- Your system should find V9 on your dialog, then double click the icon to confirm the program
should show the connection has been made. As per of the pairing process, you may need to
enter a passkey (0000) depending on Bluetooth version of devices.
Pairing V9 with Mac OS X 10 or above
1- Please keep V9 and Mac in the range of 1 meter when pairing.
2- Turn on V9, blue/red LED blinks quickly, the unit is standby for pairing.