User Manual

Screen Overview
Primary Screen Elements
The Main Screen displays important information at-a-glance. The Main Screen can be accessed
quickly from any other screen by pressing the Meters Button. Press and hold the Meters Button, then
slide the RTN / FAV Switch to the left to toggle between display of timecode frame rate and sample
rate.
Input tracks
Bus tracks
Armed track
Current take CF time remaining and audio file format
Active playback media
SD time remaining and audio file format
Power source & level
Sample rate information RTN level
Monitor (Headphone) information
(Displays HP level during adjust-
ment)
Input limiting activity
Meter View
SMPTE Timecode
Absolute recording time
Unarmed track
Powered off Input
This screen shot shows default settings. Meter Style can be changed to solid (See “Metering”, page
20) and track names can optionally be shown in the meters (See “Track Naming”, page 32).
Meter Views
Pressing the Meters Button from the Main Screen will cycle through different Meter Views on the
Main Screen. There are 3 views to cycle through and each view can be set to one of four configura-
tions from Setup Menu option SYSTEM > Meter Options: The second and third meter view can be
turned off so that only one meter view is shown on the Main Screen at all times.
L, R, X1, X2, 1-6 L, R, 1-3
633 User Guide and Technical Information
10
v. 1.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Screen Overview