User Manual

Using a USB Keyboard
To aid in navigation and data entry, a standard USB keyboard can be connected to the 633. To use a
USB keyboard, connect the male USB A plug of the keyboard into the supplied USB A female adapt-
er, then connect the keyboard to the left panel USB B jack on the 633 with the supplied USB cable.
Change the Setup Menu option SYSTEM > USB Port to Keyboard.
Keyboards with an embedded USB hub are not compatible. Some keyboards must be disconnected when
powering the 633 up and only connected after the 633 has booted.
Whenever the on-screen keyboard is displayed, an attached USB keyboard can be used to enter data.
The table below shows the keyboard shortcuts available.
Key Combination Action
F1 Accesses the Setup Menu.
F2 Accesses the Take List.
F3 Switches between Meter Views.
Menu Button Accesses the Setup Menu.
Ctrl + R Record
Ctrl + S Stop
Spacebar Play
Left Arrow
Main Screen: Rewind.
Input Settings Screen: Toggle phase inversion.
Right Arrow
Main Screen: Fast Forward.
Input Settings Screen: Toggle LR Mix assignment.
Up / Down Arrows
Main Screen: Adjusts headphone volume.
In menus: Moves highlighter.
While editing parameters: Changes value.
Enter
Main Screen: Accesses HP Headphone Source List.
In menus: Same as encoder press (activates current selection).
Alt + Enter Main Screen: Toggles arming of selected track.
Ctrl + Enter Accesses gain adjustment for highlighted L, R, X1, X2, or RTN track.
Ctrl + Up / Down Arrows
Main Screen: Select tracks.
Input Settings Screen:
Ctrl + Left Arrow Input Settings Screen: Change X1 assignment.
Ctrl + Right Arrow Input Settings Screen: Change X2 assignment.
633 User Guide and Technical Information
56
v. 1.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Using a USB Keyboard