Owner's manual

Storing and Recalling Settings

The 664 can store and recall user settings to User Setup Files on the SD card, CF card, or internal

memory. User Setup Files contain all settings made in the Setup Menu and all Input Settings (includ-

ing routing). Multiple, custom-named setup ﬁles can be saved to the CF or SD card. Additionally,

four setups can be saved to the 664’s internal memory where they will be available even when no CF

or SD card is inserted.

To save a User Setup File, access the Setup Menu option Quick Setup. Select the Save option for the

desired storage area and enter a name for the Setup File.

• The INT1, INT2, INT3, or INT4 areas will hold one setup each. Seings stored to these areas will

overwrite any seings previously stored there.

• Saving a Setup File to the CF or SD card will create a folder named SETTINGS (If it is not already

present) and place the Setup File in that directory. If a Setup File with the entered named already

exists, the previous Setup File will be overwrien

Setup Files stored on the CF or SD card can be deleted from the File List. To delete a Setup File from

the CF or SD card:

1. Press the Menu Buon to enter the Setup Menu.

2. Use the Headphone Encoder to select option FILE STORAGE > File List.

3. Use the Headphone Encoder to select either CF or SD.

4. Use the Headphone Encoder to select the SETTINGS folder.

5. Use the Headphone Encoder to highlight the Setup File to be deleted.

6. Slide the RTN Switch to access File Options for the Setup File.

7. Use the Headphone Encoder to select Delete.

664 User Guide and Technical Information

Storing & Recalling Settings