Owner's manual

Setup Menu
The chart below shows the Setup Menu number, Function name, a description of the control, options
available within that menu, and the factory default setting.
Inputs
# Parameter Name Description Options
1
Ch 1-2 Linking
Links channels 1 and 2 with or without Mid/Side
decoding.
» Unlinked
• 1-2
• 1-2MS
2
Ch 3-4 Linking
Links channels 3 and 4 with or without Mid/Side
decoding.
» Unlinked
• 3-4
• 3-4MS
3
Ch 5-6 Linking
Links channels 5 and 6 with or without Mid/Side
decoding.
» Unlinked
• 5-6
• 5-6MS
4
Phantom Voltage
Globally adjust voltage level of phantom power (on all
inputs which have phantom power enabled).
» 48V
• 12V
5
PFL Mode
Signal source of PFL will always be pre-fader (Pre-
Fade) or will follow the input’s routing to its ISO track
(Follow ISOs).
» Pre-Fade
• Follow ISOs
6
Input Mode
Set to 12 Channel to enable line inputs 7 to 12. This
option is disabled when the CL-6 Input Controller is
attached to the 664.
» 6 Channel
• 12 Channel
Outputs
# Parameter Name Description Options
1
Linking
For the purposes of arming and level adjustment, link
tracks L and R, and/or X1 and X2.
• LR, X1X2
» LR, X1, X2
• L, R, X1X2
• L, R, X1, X2
2
XLR-L Out
Select the analog output level or engage AES3 digital
on the L XLR-3M output.
• Mic
» Line
• -10
• AES 1,2
3
XLR-R Out
Select the analog output level or engage AES3 digital
on the R XLR-3M output.
• Mic
» Line
• -10
• AES 3,4
4
10-pin A Out
Select the analog output level or engage AES3 digital
on the both balanced outputs of the 10-pin A output.
• Mic
» Line
• -10
• AES 5-8
5
10-pin C Out
Select the analog output level on the both balanced
outputs of the 10-pin C output.
• Mic
» Line
• -10
6
TA3 L-Out
Select the analog output level of the L TA3 output.
• Mic
» Line
• -10
664 User Guide and Technical Information
51
Setup Menu