users manual

833 User Guide
8
CHANNEL SCREEN
Channel desgination
and user-dened name
Channel Meter view
Channel Trim value
Channel Arm
Channel to ISO routing
Channel Linking
Channel EQ
HPF (High Pass Filter) Polarity
Channel delay
Channel to L, R, 1-4
Limiter
HP Preset
Channel Mute
L C R pan select
Channel Input selection
Slate Mic
Channel Fader Value
CHANNEL DESIGNATION AND USER-DEFINED NAME Indicates
mixer channel and user-dened name. Both are overlaid onto the
channel audio meter. When in a Channel Screen, hold the PFL Switch
for about 0.5 s to enter the virtual keyboard and enter a user-dened
name for the channel.
CHANNEL METER VIEW Indicates the audio level of the channel.
Metering follows ISO Routing selection, Pre- or Post-fade.
CHANNEL TRIM VALUE Indicates the gain of the channel trim con-
trol. The gain range depends on the type of input selected.
Mic: +12 to +76 dB
Line: -14 to +50 dB
AES3: -10 to +20 dB
AES42: 0 to +70 dB
Returns: -20 to +30 dB
Channels 1-6 trim is adjustable using the front panel trim controls.
Channels 7 & 8 trims are adjustable in the channel screen using the
Select knob.
CHANNEL FADER VALUE Indicates the level of the channel fader
control, continuously-variable from Off to +16dB.
Channels 1-6 fader is adjustable using the front panel fader controls.
Channels 7 & 8 faders are adjustable in the channel screen using the
Select knob.
CHANNEL INPUT SELECTION Indicates which physical audio input
is feeding the channel.
ISO (CHANNEL->ISO) ROUTING Indicates where the isolated
track’s audio is tapped from in the audio chain. Pre- or Post-fade.
CHANNEL LINKING Indicates the current linking status. The linking
options are Unlinked, adjacent channels (eg. 1,2) and adjacent chan-
nels Mid Side (eg. 1-2MS). Linked parameters are: trims, faders, HPF,
delay, limiter, mute, ISO, Bus Send 1 and Bus Send 2. Stereo panning
is odd to L and even to R. For MS linking, the pan becomes a balance
control between M and S.
CHANNEL EQ Indicates the EQ position in the audio chain. Pre- or
Post-fade. Select to enter Channel EQ screen.
HPF (HIGH PASS FILTER) Indicates on/off status where green
icon and white value = ”On” and grey icon and value = “Off”. The HPF
frequency is variable in 10 Hz steps from 10 Hz to 320 Hz.
POLARITY REVERSE Indicates polarity status. Green icon = polarity
reversed, white icon = polarity normal.
CHANNEL INPUT DELAY Indicates input delay time. The input delay
is continuously-variable in milliseconds from 0-50 ms.
CHANNEL TO BUS ROUTING Determines the bus or buses channel
audio will be sent. When a channel is routed to a bus as a Send (bus
box highlighted blue), the Send Gain value is used. When a channel
is sent Pre-fade (green) or Post-fade (orange), the Send Gain value is
ignored.
CHANNEL LIMITER Indicates on/off status of channel limiter.
MUTE Indicates mute status of channel. Blue icon = muted. Toggle
mute on/off with the “Tone” switch.
L C R SELECT Indicates the stereo pan position of the channel’s
contribution to the L/R mix. Orange = selected. Use the */** switch
to select. Hold */** switch and rotate Select knob for continuous
panning positioning. Alternatively, press and hold Select knob, then
use */** switch to pan continuously.
ARM Toggle the Rtn/Fav switch to arm or disarm isolated track for
recording.
HP PRESET Pressing in the HP knob toggles between HP preset
and PFL.