users manual

833 User Guide
13
Power
Allows conguration of various power settings.
POWER SOURCE ICONS (Batt1, Batt2, DC, TC Batt,) Indicates the
power condition of each power source. [Green = normal, yellow =
below normal, red = warning]
1. DC REF Allows proper power level indicator calibration based
upon the type of DC power source used. [12V DC*, 14 V Li-Ion, 12 V
Lead Acid, Full Range (10-18 V), Smart Battery].
2. DC LOSS Selects how the unit should operate when DC power is
lost. [Switch to Next Supply*, Turn Off].
3. SMART BATTERY DATA Displays Time Remaining, Percent Re-
maining, Cycle Count, and Temperature of Smart Battery.
Note: This menu is only displayed when a smart battery is connected.
4. BATT CHARGING Selects battery charging mode when connected
to an external DC source. [Disabled, When Power Off, When Power On,
Always*].
5. USB-A CHARGE PORT Allows charging of compatible external
USB devices such as Android tablets [500 mA or 1.5 A*].
Channel Setup
1. PHANTOM VOLTAGE Selects phantom power voltage for all
inputs. [12 V, 48 V*].
2. PFL MODE Selects the source of the PFL feed. [Auto* Pre-fade,
Post-fade] Auto = pre-fade if channel is routed to ISO track pre-fade,
post-fade if channel is routed to the ISO track post-fade.
3. CHANNEL GROUPING Selects grouping of faders, record arming,
and mutes across channels. The lowest channel number in the group
controls the other channels grouped. Two channel groups are possi-
ble, channels grouped can only be assigned to one group.
a. Group 1 [1-8]
b. Group 2 [1-8]
c. Group 3 [1-8]
d. Group 4 [1-8]
4. PFL GAIN A preset amount of gain that is applied to any chan-
nel(s) with active PFL.
Channel Groups
CHANNEL GROUPS ENABLE/DISABLE
Provides global enable/disable for each of the four groups in the
channel grouping menu. Scroll to Group 1-4 using either knob, then
press the knob to enable or disable the group.