users manual
833 User Guide
28
SUPPORTED THIRD-PARTY CONTROLLERS
The 833 supports some third-party external controllers that conform
to the MCU protocol.Two controllers may be connected simultaneously
for extended control. The CL-12 Linear Fader Controller cannot be
used with another control surface.
ICON PLATFORM M+ AND D2 DISPLAY Eight channel fader bank
with control over gain, bus, sends, coms, trim, and pan. Dedicated
Select, Mute, Solo, and Arm buttons for each channel.
ICON PLATFORM X+ Eight channel fader bank with single assign-
able knob and Select, Mute, Solo, and Arm buttons.
ICON PLATFORM B+ Assignable illuminated 50 pad button surface.
BEHRINGER X-TOUCH Eight channel trim and fader panel with
master volume and additional mappable buttons.
MACKIE MCU PRO Eight channel trim and fader panel with master
volume and additional mappable buttons.
In addition, any MCU controller may have its buttons custom-mapped
to perform any of the following actions on 833:
Function Action
Auto Mixer On/Off Toggles the Auto Mixer on/off
Bus Mode Bus Masters
Channel Groups Edit Create/Edit channel groups
Channel Sends on Faders Shortcut to put Bus sends on linear faders/toggle on/off
Channel Source Edit Patch input to channel
Circle Take Circle take
Com Activates Com Send
Com Rtn Activates Com Rtn
EQ Mode Spills EQ parameters over scribble strips, Fader Bank right to view last parameter.
Push and hold V-Pot 1 to toggle EQ on/off, push each band’s amplitude V-Pot to toggle
on/off each band, push each band’s Q V-Pot to toggle eq type Shelf/Peak
False Take Activates False Take function
Fat Ch. Mode Spills fat channel parameters across scribble strips
Fav HP Preset Recalls Fav HP Preset from Main Menu>Outputs>HP Presets
Fav Toggle Emulates Fav toggle on 833
Home Activates Home screen and Trim knobs mode
HP Presets Menu Shortcut to Main Menu>Outputs>HP Presets
Jog is HP Switches Jog wheel to emulate HP knob on 833
Jog is Select Switches Jog wheel to emulate Select knob on 833
Jog Wheel Press Acts as “Select” while using jog wheel
L-ident Indenties left channel output by varying amplitude vs. right channel with constant amplitude
Menu Emulates the Menu button on 833
Meters Emulates the Meter button on 833
Mic Toggle Emulates the Mic toggle on 833
Mix Pan Mode Activates all V-Pots to Pan mode on every channel. Push to center pan
Mix Trim Mode Activates all V-Pots to Trim mode on every channel. Push to enter pan mode
Nav Down Moves the highlighted selection up one in matrix screens, emulates HP knob down in Home screen
Nav Left Navigates back to previous screen
Nav Right Selects the currently highlighted selection
Nav Up Moves the highlighted selection down one in matrix screens, emulates HP knob up In Home screen
Out Mode Selects the output masters mode
Play Remain Time Selects the remaining time in the LED timecode display