User Manual
970 User Guide and Technical Information
7
Menu & Navigation
4. Press the Control Knob to edit the highlighted parameter. The highlighter will become blue.
5. Rotate the Control Knob to adjust the value. (Track Name will present an on-screen key-
board. Use this or the aached USB keyboard to edit the Track Name, then select OK.)
6. Press the Control Knob to set the value. The highligher will become blue and once again
highlight the entire track.
LCD
From the Main View, press the LCD Button to quickly switch between banks of meters (8, 16, or 32
depending on the value of [Audio - Audio Screen Meters]). When the Main View is not displayed,
press the LCD Button to return to the Main View. Press and hold the LCD Buon for two seconds to
turn o the LCD; press again to turn on.
Press LCD Button + Control Knob to display the LCD Control Panel. The LCD Control Panel pro-
vides adjustments to the LCD backlight and button backlight. The parameter with the orange slider
bar is the selected parameter. To toggle through the parameters press the Control Knob. To adjust the
setting, turn the Control Knob. Press LCD again to exit the LCD Control Panel.
Menu
Press the MENU Button (keyboard: F1) to enter the Setup Menu. Most settings of the 970 are ac-
cessed and changed from the Setup Menu. Navigate between menu items by turning the Control
Knob. Select menu items by pressing the Control Knob. When in a menu, press the MENU Button to
go back to the previous screen.
The Setup Menu is not accessible when in Record or Playback. If the Setup Menu is open when record or
playback is engaged, the Setup Menu will close and return to the Main View.