User Manual

970 User Guide and Technical Information

Synchronization & Timecode

24 Hour Run Timecode Mode

Generator mode. Timecode runs continuously. When this Timecode Mode is selected or when the

time/date is altered, the timecode value is jammed to the value of the time-of-day clock. The value

can be set by “jamming value” in the Setup Menu options [TIMECODE/SYNC - Jam Received TC] or

[TIMECODE/SYNC - Jam Time Of Day]. The value can also be set manually from Setup Menu option

[TIMECODE/SYNC - Set Generator TC].

24h Run Auto Mute

Functions the same as 24h Run mode except timecode signal is muted from the timeocde output

when the 970 is in stopped mode. This allows rec-run functionality when Rec Run mode is not suit-

able (e.g. Multi-camera shoots).

External Timecode Mode

Reader mode. The 970’s internal timecode generator follows an external timecode signal appearing

at the BNC Timecode Input. If the external timecode is removed, the internal generator continues to

run to preserve continuous timecode.