User Manual

970 User Guide and Technical Information
31
External Control
PIXNET All Units Page
When PIXNET is launched the first page displayed is the All Units Page. This is a quick overview of
all units connected to the network. Information available is Unit Name, IP Address, File type, Video
Input details, Format details (for PIX video recorders), and assigned Group number. From this page,
a 970 can be assigned to a particular group (See “Network Grouping”, page 27). Click on the Unit
Name to open the Unit Page for that particular unit.
3
1 2
4 5 6 7 8
1) Address Bar
Type in 970 IP Address to connect to
PIXNET.
2) Unit Page Tabs
Each Unit Page can be opened in a sepa-
rate browser tab
3) Unit Name
Lists all units connected to the network.
Click on a Name to open the Unit Page
for a particular unit.
4) IP Address
Displays the IP Address for all units cur-
rently on the network.
5) File
970 or PIX in Audio Mode: Displays
WAV Poly or WAV Mono. PIX unit in
Video Mode: Displays the resolution and
frame rate that the unit is configured to
record.
6) Input Signal Information
970: This field is always blank. PIX unit:
Displays the resolution, frame rate, and
source (SDI or HDMI) of incoming video
signal.
7) Format
970 or PIX unit in Audio Mode: Displays
sample rate, bit depth, and armed track
count. PIX unit in Video Mode: Displays
details of the video codec the unit is set to
record.
8) Group
Displays Group settings for all units cur-
rently on the network. Group settings can
be edited using the drop-down menu for
each unit.