User Manual

970 User Guide and Technical Information
3
Panel Descriptions
10) Fast Forward button
When Stopped, press to cue up the next
file for Playback. During Playback or
Pause, press once to jump to the next Cue
Marker or next file, press and hold to in-
crease playback speed. Continue to hold
for faster speeds.
11) Record Button
Begins recording. Optional: Splits the
recording and begins writing a new
file when pressed while recording
([System - Rec button File Split])
12) Rewind Button
When Stopped, press to cue up the previ-
ous file for Playback. During Playback
and Pause, press once to jump to the
previous Cue Marker or beginning of the
file, press and hold to reverse playback
speed. Continue to hold for faster reverse
speeds.
13) Headphone Volume Knob
Adjusts the overall volume of the head-
phones. NOTE: the headphone output is
capable of ear-damaging levels. Take care
when adjusting among signal sources.
14) Headphone Output 1/4”
TRS stereo headphone connector. Can
drive headphones from 8 to 100 ohms to
very high headphone levels.
15) USB Keyboard Input
USB A female connector to connect a USB
keyboard. Keyboards can be used to navi-
gate, control, and enter metadata into the
970. Keyboards with integrated USB hubs
are not compatible.
Rear Panel
2
1
7 8 9
141516 1213
10
11
3 654
1) Secondary DC Power Input (XLR 4-pin)
Accepts 10–27 volts DC. XLR 4-pin con-
nector is wired pin-1 ground, pin-4 posi-
tive (+).
2) Primary DC Power Input (XLR 4-pin)
Accepts 10–27 volts DC. XLR 4-pin con-
nector is wired pin-1 ground, pin-4 posi-
tive (+).
3) MADI I/O (SC Optical)
Input (top) accepts MADI (AES10) digital
audio. Output (bottom) provides MADI
(AES10) digital audio. 64 channels. MADI
connections use multimode fiber and
networks.