User Manual
17
Modes and Presets
Setting the Mode
We’ve designed the MixPre-10T to be easy to use for the novice without taking
away truly professional-level features for the seasoned pro user. We want both
the newcomer and the career professional to enjoy a quick, easy setup and
foolproof results. To accommodate this, we’ve incorporated three modes of
operation into the MixPre-10T: Basic, Advanced, and Custom.
To set the mode:
1. Turn all channel knobs to O (at full counterclockwise position).
2. Tap .
3. Tap System > Mode. Options include: Basic, Advanced, and Custom.
Basic Mode
Basic mode is intended for hassle-free, plug-and-play use. This mode is ideal
for the new user and amateur needing only the basic functionality of the
MixPre-10T.
Screen Sub-menu Description
Menu Presets Save and load user presets to and from SD card and internal
memory. Also allows resetting all settings to factory default.
Menu Project Create new projects, open or trash existing projects, create
sound reports, or enter metadata information for sound
reports.
Menu Inputs Provides settings for the 3.5 mm Aux/Mic In, as well as access
to the Channel screen for channels 9 and 10.
Menu Timecode Provides settings for timecode and sync.
Menu Tone/Slate Turn the test tone/slate mic on or o, set tone routing, and
adjust slate mic level. By default, the test tone is a 1kHz sine
wave at -20dBFS. By default, the slate mic level is 25 dB, but
may be adjusted from 0 to 50 dB.
Menu Record Choose to auto start/stop recording via HDMI from a camera or
from LTC.
Menu SD Card Displays SD card info and allows for formatting SD cards and
and emptying their trash folder.
Menu * Shortcuts Sets user-denable */** toggle switch as shortcuts to key
functionality.