User Manual

ManualsBrandsSound Devices ManualsPortable Digital RecordersMixPre-10T 10-Channel / 12-Track Multi-Track Field Recorder

User Guide

Screen Sub-menu Description

Menu System Provides settings for Basic/Advanced/Custom mode, Custom

mode setup, limiters, Date/Time, File Transfer, Bluetooth

Wingman App password, adjusting LCD/LED brightness,

updating rmware, and viewing version and regulatory

information.

Menu Power Select the type of batteries being used (Alkaline, NiMH,

L-Mount) to ensure that the Power Status icon on the Home

screen accurately displays remaining battery level.

Menu HP Preset Select LR Stereo, X1X2 Stereo or USB 1,2 or USB 3,4 as

headphone sources.

Channel Pan Pan the channel’s signal Left, Center or Right in the stereo LR

mix and Stereo Out.

Channel Input Select one of the available Mic, Line, Aux, or USB inputs to

route to the chosen channel.

Channel Phantom Turn on 48V phantom power when using a condenser

microphone in the chosen channel.

Channel Low Cut Select the frequency at which a low cut lter will be placed.

The lter has a carefully-crafted 18db/octave slope. Low Cut

options are only On/O in Basic mode.

Advanced Mode

Advanced mode is intended for use by professionals and users who want to

have every available setting and option at their disposal. All settings available

to Basic Mode apply to Advanced Mode in addition to:

Screen Sub-menu Description

Menu Outputs Provides routing, gain and delay settings for the main L/R and

X1/X2 outputs plus output delay settings.

Menu Tone/Slate Provides additional Tone mode (Continuous and Left Identify)

and Tone Level settings.

Menu Record Provides additional record settings for gain, sample rate, bit

depth and LR linking.

Menu HP Preset Provides additional HP presets for LR Mono, User Presets 1-4,

Edit HP Preset utility and HP Solo mode selection. Camera

Stereo and Camera Mono are also available when Aux In Mode

is set to Camera.

Menu System >

Limiters

Lets you turn limiters on or o.

Channel Solo Lets you “solo” the selected channel in the headphone output.

Solo mode can be set to Individual or Multiple in the HP Preset

menu. When a channel is soloed, its light ring will ash

orange.

Channel Arm Allows pre-fade recording of the channel to an individual track

on the SD card.

Channel Gain Sets the sensitivity of the input. Generally, the Gain should be

set so that the loudest parts of the audio signal just touch the

red segments of the meters.