User Manual
19
MODES AND PRESETS
Screen Sub-menu Description
Channel Pan Lets you position the audio of the channel anywhere between
Left and Right in the stereo image of the LR mix and Stereo
Out.
Channel Linking Lets you link channels 1 and 2, 3 and 4, 5 and 6, and 7 and
8 either as a stereo pair, mid side pair, or turn linking o.
Channels 9 and 10 can also be linked as a stereo pair. Also lets
you link channels 1-4 and/or 5-8.
Channel Low Cut Lets you select the frequency at which a low cut lter will be
placed. Increased options in Advance mode include: O, 40-
160 Hz in 40 Hz increments.
Channel Phase Lets you set phase to either Normal or Inverse.
Channel Delay Sets the delay from 0 to 30 ms in 1 ms increments.
Custom Mode
Custom mode is intended for users who want to customize the features and
functionality available to them. This mode grants access to dierent sections of
Advanced Mode features, turning them on or o in the user interface as desired.
To congure Custom Setup:
1. Tap .
2. Tap System > Mode, and then select Custom.
3. Tap System > Custom Setup to customize what features you want to
access.
Custom Setup options are:
Pag e Sub-menu Description
1 Channel Lets you access Solo, Track Arm, extended Pan, Input Select,
Phantom, Phase, delay, Linking, and Low Cut, which is
selectable by frequency.
1 Gain Lets you access two-stage Channel Gain controls (trim/fader).
1 Headphone Lets you access extended headphone source select options
including factory and user headphone presets, preset editing
and Solo setup for Individual/Multiple channels.
1 Record Provides additional record settings for gain, sample rate, bit
depth and LR arming/linking, as well as ISO track arming/
naming.
2 Metadata Adds ability to change track name, rename les, add notes and
undo recordings.
2 Outputs Provides routing and gain settings for the balanced LR outputs
and unbalanced X1 X2 outputs as well as limiters On/O, and
Tone mode and level.