User Manual
27
Outputs
While we were carefully thinking about how to maximize exibility with the
inputs, we were doing the same with the outputs!
Routing L/R and X1/X2 Outputs
The MixPre-10T includes 2 pairs of outputs, L/R and X1/X2, for a total of 4
output buses. The L/R TA3 outputs are balanced, while the X1/X2 3.5mm are
unbalanced. In Basic mode, the LR mix tracks are output from both the L/R
and X1/X2 outputs. In Advanced mode, the L, R, X1, and X2 outputs can be fed
independently from any channel, aux input, USB input or LR mix track.
To route the L/R and X1/X2 stereo outputs:
1. Tap .
2. Tap Outputs.
3. Select any of the following:
◦ L Output
◦ R Output
◦ X1 Output
◦ X2 Output
4. From the routing matrix, select what channel to send to the output.
Here are images showing two of the four routing matrices for the outputs.
In addition, if you choose to send the channels to outputs, you can select
either pre-fade (Channel knob has no eect) or post-fade (Channel knob
controls level).