User Manual

User Guide
34
To arm the L,R mix tracks:
1. Tap .
2. Tap Record > Rec L,R.
3. Select from:
◦ L&R Linked - both armed, linked gain
◦ L&R - both armed, individual gain for L and R
◦ L - only L armed
◦ R - only R armed
◦ O - neither armed
◦ O & Linked - neither armed, linked gain
Record Menu
In Basic mode, the Rec Trigger function can be used to automatically start and
stop recording from a compatible HDMI or timecode source. This cool feature
lets you simultaneously start recording on a camera and the MixPre-10T just
by pressing the Record button on the camera, thus eliminating the possibility of
forgetting to record audio on the MixPre-10T.
In Advanced mode, there are many more settings available, as shown in the
following table:
Sub-menu Description Options
Rec L,R Arms L and/or R mix buses. • O
• O & Linked
• L
• R
• L&R
• L&R Linked
Left Gain Sets the gain for the L mix. • -30 - 0 dB (1 dB increment)
Right Gain Sets the gain for the R mix.
This setting is disabled when Rec L,R Mix is
set to LR Linked.
• -30 - 0 dB (1 dB increment)
Sample Rate The internal sample rate and sample rate
of recorded WAV les.
The default is 48kHz.
• 44.1 kHz
• 47.952 kHz
• 48 kHz
• 48.048 kHz
• 96 kHz
• 192 kHz
Bit Depth The bit depth of recorded WAV les.
The default is 24.
• 24
• 16
Rec Trigger Sets record triggering from either timecode
or HDMI ags. The default is O.
• O
• HDMI ag
• Timecode