User Manual
39
USB
compatible. Additionally, some keyboards must be connected only after the
recorder is turned on.
Copying to a USB Drive
The MixPre-10T supports automatic copying of active projects from its SD card
to a USB thumbdrive inserted into its USB-A port. This handy feature is great
for fast hand-o copies to a client as well as for backup purposes. All you need
to do is insert a USB thumbdrive, and MixPre-10T will handle the rest.
When the USB thumbdrive is inserted, it will automatically mirror the current
project being recorded to the SD card. Even metadata edits to previously
recorded les, are automatically updated on the USB thumbdrive.
Automatic copying starts when you nish recording a le, even if you start
recording or playing another le. This reduces copy lag. At the end of a day’s
shoot, you’ll typically only have to wait for the last recorded le to nish
copying.
You can also manually copy previous projects by using the Project Copy feature.
L Sound Devices highly recommends only using approved USB thumbdrives for
reliable operation. For more information, see the MixPre Series list at:
www.sounddevices.com/support/approved-media
To auto-copy active project les to a USB thumbdrive:
X Insert a thumbdrive into the recorder’s USB-A port.
Copying will occur automatically whenever a le is recorded to the SD card.
To conrm copying is in progress:
X Tap the Status bar until you see the USB drive status
⚠ Do not remove the USB thumbdrive from the recorder when Copying is in
progress.
During auto-copying, if power is lost or the USB thumbdrive is inadvertently
removed, you can repair the copied le. Simply re-insert the drive and
press record.