User Manual

45
TIMECODE
BNC Out - Timecode or Word Clock
By default, the TC Out BNC outputs timecode; however, it may be congured
to output word clock for when you want to use the MixPre-10T as an accurate
master clock.
To congure the TC Out BNC:
X Set Menu>Timecode>BNC Out to either Timecode or Word Clock.
BNC In - Timecode or Word Clock
By default, the TC In BNC is set to receive timecode; however, it can be
congured to receive an external word clock.
To set the TC In BNC to Word Clock:
X Set Menu>Timecode>BNC In to Word Clock and connect a Word Clock
source.
Sync Ref
The MixPre-10T can be set to slave to an external timecode or word clock sync
reference connected to its BNC In port.
The sync reference devines where the A/D and D/A, timecode, and le writing
receive their oscillator. BY setting to External, the MixPre-10T’s sampling can be
exactly synchronous with other pieces of gear.
L LTC sync reference is only possible via the BNC input, not the 3.5 mm LTC input.
To set sync reference:
X Set Menu>Timecode>Sync Ref to either Internal or BNC In.