User Manual

7
Powering
Flexible Powering Options
In designing the MixPre-10T, we felt that it was important for it to be able to
operate in a wide array of applications and environments. To support that goal,
power can be supplied from several possible sources:
• 12 VDC via 4-pin Hirose from an external battery or AC power supply (an
optional accessory called XL-WPH3).
• Eight AA NiMH rechargeable or Lithium primary batteries installed in the
provided 8-AA battery sled, called MX-8AA.
• One or two Sony-type L-mount batteries installed in the optional L-mount
battery sled accessory, called MX-LMount.
The master power switch for the MixPre-10T is located in the upper right corner
of the left side panel.
Power Switch
For preservation of battery power, 4-pin Hirose power sources take priority over
batteries if both are connected.