User Manual
User Guide
28
To format an SD card:
1. Insert an SD card in the slot located on the rear panel.
2. Tap .
3. Tap SD Card > Edit > Format.
4. When asked to conrm the command to format the card, tap OK.
Cards with a capacity of 32 GB or less will be formatted with the FAT32 le
system. Cards with a capacity greater than 32 GB will be formatted with the
exFAT le system.
L The exFAT le system is not compatible with Windows XP or Mac OS X 10.6.4 and
lower.
Transport Controls
The three Transport controls (illuminated buttons) on the front panel are used
to perform recording and playback functions.
Function Control Action
Record
Press to begin recording a new le. The button illuminates red
while recording is in underway.
Stop
While recording, press once to stop recording. While in
playback, press once to stop playback. While in standby,
press and hold to display next name.
Play / Pause
Press to begin playback of the last le recorded or le
currently loaded. The button illuminates green during
playback. While in playback, press once to pause, and press
again to resume playback. Whenever playback is paused, the
button and the current le name will ash green.
Scrub
While playing or paused, press and hold the headphone
encoder to enter Scrub mode. Then rotate clockwise for fast
forward or counter-clockwise for rewind at speeds of 0x,
1/8x, 1/4x, 1/2x, 1x, 2x, 4x, 8x and 16x. The audio is heard
in Scrub mode up to 2x speed.
In Basic mode, only the L/R mix bus is recorded. Recording is as easy as
pressing the REC button. Push the Play button to play les and the Stop button
to stop recording or playback. Pushing the Play button while in Play mode,
initiates Pause mode. The Play button as well as the current le in the display
will ash to indicate that Pause is active.
In Advanced Mode, all channels as well as the L/R mix bus may be recorded
individually. To record an individual channel, ensure that it is armed.