User Manual

49
Specifications
Specications are subject to change without prior notice.
For the latest information available on all Sound Devices products, visit our
website at: www.sounddevices.com.
Audio Inputs
Name Description
Frequency Response
10Hz to 40kHz +/- 0.5dB re 1kHz @ 96kHz sample rate
Total Harmonic Distortion
(THD)
0.005% max (@1kHz, 22-22kHz BW, gain=20dB, -10dBu in)
Equivalent Input Noise
(EIN)
-130dBV (-128dBu) max (A-weighting, gain=76dB, 150 ohm source impedance)
Inputs
• Mic: XLR active-balanced; 4k input Z
• Line: XLR active-balanced; 4k input Z
• Aux/Mic in: 3.5mm TRS, 2-channel unbalanced; 100k input Z
• USB audio: 2 channel
• All inputs fully RF-filtered and overload protected
Gain
• Mic input: +6dB to +76dB
• Line input: -20dB to +30dB
• Fader: -inf to +20dB
• Headphone: -inf to +20dB
• Total, Mic-to-recording (max): +96dB
• Aux In (Mic): +10dB to +40dB
• Aux In (Line): -10dB to +20dB
• Total Aux Gain including Fader, Mic-to-recording: +60dB
ADC
32 bit precision; 120dB dynamic range min (A-weighted, gain=10dB, fader=0dB)
Maximum Input Level
• Mic XLR: +14dBu (limiters on or off)
• Line XLR: +40dBu (limiters on or off)
• Aux In (Mic): -10dBu
• Aux In (Line): +10dBu
Limiters
• Limiter at all gain stages, range > 40dB. First stage analog, subsequent stages digital
Low Cut Filters
40Hz to 160Hz (adjustable), 18 dB/oct. First stage analog, subsequent stages digital
Microphone Powering
• Mic XLRs: 48V via 6.8k resistors, 10mA each
• Mic 3.5mm: 3V @ 3k source Z