User guide
Embedded SMPTE timecode and record start and stop ags are included on the SDI output of the
PIX 240i. SDI output signal can be either 10-bit 4:2:2 (YCbCr) or 12-bit 4:4:4 (YCbCr) as dened by
Setup Menu option Video
SDI Output Type.
Timecode Overlay
For monitoring purposes, the timecode value and transport status of the PIX 240i can be visually
overlaid onto video output signal. The overlaid timecode value is displayed in the lower-left corner
of the video signal whenever video output is active. The color of the Timecode Overlay text will
change depending on the transport state of the PIX 240i: White=stop, Green=playback, Red=record.
Access Setup Menu option Video
Video Out TC Overlay to enable Timecode Overlay on SDI,
HDMI, or both video outputs.
PIX 220i and PIX 240i Video Recorder User Guide
18
v. 3.52 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Video Inputs & Outputs