User guide
Cue Points
During playback, pressing the FILES buon will set a cue point. The previous cue point is always
displayed with green text in the lower left-hand corner of the OSD. To quickly jump to the next or
previous cue point, tap the Fast Forward (>>) buon or Rewind (<<) buon respectively.
Looping
Looping playback can be enabled between consecutive cue points or
the beginning and end of the current clip. To toggle Looping Mode and
begin looping the currently playing clip, hold the Play () buon for
1 second during Shule Mode or Playback Mode. “Loop: Clip” will be
displayed with green text in the boom left-hand corner of the OSD.
To loop between two consecutive cue points, hold down the Play
() buon and press the Fast Forward (>>) buon while playback is
in between the two cue points. The two points that are being looped
between will be displayed in green text in the boom left-hand corner
of the OSD. To return to looping the entire clip, hold down the Play ()
buon and press the Rewind (<<) buon.
To exit Looping mode, hold down the Play () buon for 1 second.
Play List
Files can be added a play list in order to play them back sequentially. Play list functions are accessed
from the File Detail view of any le. To access the File Detail view of a le:
1. Push the FILES buon to view the File List.
2. Highlight the desired le, then push in on the Control Knob to enter the File Details view.
Add to Play List will add the le to the end of the play list. Remove from Play List will remove the
le from the play list and decrease the position of all les above in the play list. Empty Play List will
clear the play list completely (note that this function aects the entire play list).
Looping between cue points
Looping entire clip
PIX 220i and PIX 240i Video Recorder User Guide
36
v. 3.52 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Playback