User guide

Specifications
Video
HDMI
Input
• 4:4:4 or 4:2:2, 10/8 bit, RGB or YCbCr
• Version 1.4a
• HDCP enabled
Output
• 4:2:2, 8 bit, RGB or YCbCr
• Version 1.3
SDI
Input
• 3G-SDI (levels A and B), HD-SDI, or SDI
• 4:4:4 or 4:2:2, 12/10/8 bit, RGB or YCbCr
• SMPTE 259, 292, and 424
Output
• 3G-SDI (level A), HD-SDI, or SDI
• 4:4:4 or 4:2:2, 12/10/8 bit, YCbCr
• SMPTE 259, 292, and 424
SDI ANC (SMPTE 291M) SDI Input (To Quicktime file)
• SMPTE 272M, 292M, 315M
• Alpermann+Velte SID (DID 0x53, SDID 0x49)
SDI Output (From Quicktime file)
• SMPTE 272M, 292M, 315M
• Alpermann+Velte SID (DID 0x53, SDID 0x49)
Supported Resolutions /
Rates (Recording, Output,
and Input)
• 1080p30
• 1080p29.97
• 1080p25
• 1080p24
• 1080p23.976
• 1080i60
• 1080i59.94
• 1080i50
• 1080PsF30
• 1080PsF29.97
• 1080PsF25
• 1080PsF24
• 1080PsF23.976
• 720p60
• 720p59.94
• 720p50
• 720p30 (SDI)
• 720p29.97 (SDI)
• 720p25 (SDI)
• 720p24 (SDI)
• 720p23.976 (SDI)
• 576i50
• 480i59.94
Up Conversion
480i, 576i to 720p, 1080i, or 1080p; 10 bit; Anamorphic, Pillar box, Zoom Letterbox, Zoom 14:9,
Zoom Wide
Cross Conversion
720p, 1080i, 1080p, PsF to 720p, 1080i, 1080p; 10 bit; Letterbox, Crop, Anamorphic
Down Conversion
720p, 1080i, or 1080p to 480i or 576i; Letterbox, Crop, Anamorphic
Frame Rate Conversion
• 24,25,30,50,60 to 24,25,30,50,60
• 23.976,29.97,59.94 to 23.976,29.97,59.94
• Automatic 3:2 pulldown removal in 23.976 and 24 modes
• Other pulldown cadences used: 2:2:2:4, 2:3:3:2, 3:2:3:2:2, and 2:2
LCD Display
5-inch IPS (In-Plane Switching) LCD; 800x480 resolution
Analog Audio
Frequency Response
10Hz-20kHz, +/- 0.5dB re 1kHz
THD + Noise
0.004% max (1kHz, 22Hz-22kHz BW)
Input Topology
Mic and Line: fully electronically balanced, RF, ESD, short, and overload protected;
pin-2 hot, pin-3 cold
Mic Input Gain
0 to 70dB
Input Impedance
3.3k
Input Clipping Level
+8dBu min.
Gain Matching
+/- 0.1dB channel to channel
High-pass Filters
40-240iHz in 40Hz increments, 6 or 12 dB/oct
Mic Powering
48V DC in mic or line position
Line Output Clipping Level
+18dBu
Output Attenuation
0-20 dB, 1 dB increments
Output Topology
Line: fully electronically-balanced, RF, ESD, short, and overload protected; pin-2 driven hot, pin-3
driven cold; let pin-3 float for unbalanced connections.
Specifications
PIX 220i and PIX 240i Video Recorder User Guide
67