User guide

Digital Audio
Sample Rate / Bit Depth
48 kHz, 24-bit
AES3
4 channels via 2 balanced AES inputs on XLR 3-pin connectors, 110 ohm, 2 V p-p.
Accepts 32k, 44.1k, 48k, 96k, 192k sample rates.
HDMI
2 channels embedded HDMI input, 8 channels embedded HDMI output.
Accepts 32k, 44.1k, 48k, 96k, 192k sample rates.
SDI
8 channels embedded SDI input, 8 channels embedded SDI output, 48k sample rate
Storage
SSD
Sound Devices approved 2.5” drives.
See Sound Devices’ website for a list of
approved media:
http://www.sounddevices.com/ap-
proved
CompactFlash
Sound Devices approved CompactFlash cards
External
eSATAp connection, supplies 5V @ 2A
Timecode and Sync
Modes Supported
Freerun, Record run, External
Frame Rates
23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
Accuracy
Holds accurate timecode for 2 hours after power is removed
Timecode Inputs / Outputs
• LEMO 5-pin (input and output)
• SDI Input BNC (input)
• SDI Output BNC (output)
• HDMI Input Jack (Input)
• Timecode Input BNC (input or output)
Timecode Input / Output Signal
(LEMO 5-pin and Timecode BNC)
20k ohm impedance, 0.3V p-p (–8 dBu) minimum / 1k ohm impedance, 3.0V p-p (+12 dBu)
Sync Output
• Analog bi-, tri-level sync / Genlock
• Wordclock (Square wave, 48 kHz sampling rate, 3.3vp-p, 75 ohm)
Ambient® Lockit
+/- 0.2ppm (½ frame per 24hrs) accuracy, field tunable via Ambient® Controller
Power
Batteries
• Operating batteries: removable 7.2 V (nominal) Sony L-type Li-ion
• Timecode battery, Internal Li-ion battery
• Time and date battery: Internal CR2032 Li coin cell. (Sound Devices recommends the unit be
returned to the factory for service of all internal components)
External
10–18 V, via locking 4-pin Hirose connector, use Hirose #HR10-7P-4P (DigiKey# HR100-ND) for
locking mating DC connector; pin-1 (-), pin-4 (+). See Powering
PIX 240i Current Draw @ 12V
1A stop mode, 2.4A record/play mode using SSD
PIX 220i Current Draw @ 12V
0.8A stop mode, 1.9A record/play mode using SSD
Physical
Size (H x W x D)
4.0” x 5.5” x 2.4” (10.2 cm x 14 cm x 6.1 cm)
Weight
2.0 lbs
Environmental
Operating Temperature
-10° C to +40° C
PIX 220i and PIX 240i Video Recorder User Guide
68
v. 3.52 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Specifications