Owner manual

PIX 270i User Guide and Technical Information
v. 2.10 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
44
Synchronization & Timecode
Multiple Cameras with Genlock Input, all Genlocked from a Single PIX
SDI/HDMI
SDI/HDMI
Genlock
A
A
B
B
In this scenario, a PIX 270i is the master sync source for multiple cameras, each with or without their
own PIX acting as a recorder. Because of this locked connection, the cameras can be run indefinitely
and be assured of frame-accurate sync with no possibility of drift.
Set the output of the sync generator to a selected rate and connect the PIX 270i Sync Out (Genlock)
and timecode output to multiple cameras (“mult” the genlock output). This connection uses the PIX
270i as both the video sync source and timecode source. Heads and tails sync for the camera and PIX
files will be perfect.
Camera #1 to PIX #1, Camera #2 to PIX #2, No Genlock
SDI/HDMI
SDI/HDMI
A
A
B
B
In this scenario, each camera is its own master video sync source , but the PIX 270i is the source of
the timecode. The PIX 270i records its files based on the camera’s clock. The heads will match per-
fectly, but the tails may drift depending on the cameras’ clocks.