Owner manual

PIX 270i User Guide and Technical Information

Network Grouping

5. Repeat step 4 for all units in the group. Now when jumping to a cue marker on one unit all

units in the group will also jump to the cue point and remain in sync.

To loop between cue points on grouped units:

1. With Loop Mode on and Cue Markers all set, locate the cue point in which the loop will

begin.

2. Press Play + Fast Forward to change the Loop behavior from Loop Clip to Loop Segment

mode. The OSD will display the loop points (for example Cue 1 - Cue 2).

3. Repeat step 2 on all units in the group. All units in the group will now loop between the

selected cue points and remain in sync.