Owner manual

PIX 270i User Guide and Technical Information
53
External Control
PIXNET Unit Page
The Unit page allows for near full remote control of the 970 via the web browser.
1
21
22
20
19
17
16
14
15
13
62
3
4 5 7 8 9
10
12
11
1) All Units Page button
Click to return to All Units Page.
2) Previous
During playback, jumps to the begin-
ning of the file or previous cue marker. In
Stopped mode, loads previous file.
3) Rewind
Acts as Rewind Button. When selected
the clip will reverse at 2x speeds.
4) Play
Functions as Play button.
5) Stop
Functions as Stop Button.
6) Unit Name and IP Address
Displays the name and IP Address of the
current unit.
7) Fast Forward
Acts as Fast Forward button. When se-
lected the clip advances at 2x speeds.
8) Next
Jumps to the next file.
9) Record
Functions as Record Button.
10) Group
Displays current Group setting, quickly
change designated group or remove from
group using the drop-down menu.
11) File Format
Displays current file format (poly or
mono WAV files). Click to change format.
12) Drive Status 1-4
Displays the drive status of all drives
(D1-D4).
13) Absolute Time
Time elapsed since beginning of current
recording or currently playing file.
14) Metadata Bar
Click the word “Metadata” or the Arrow
to expand or contract the Metadata View
for previous, current, and next takes.
15) Timecode
Displays the current timecode value.
16) Frame Rate
Displays the current timecode frame rate.
17) File Name
Displays the current file name.
18) Menu Tabs
Click on each tab to display the respective
menu.
19) Armed Channel Count
Displays the current amount of armed
audio channels. This is the amount of
tracks that will be contained in the next
take recorded.
18