Owner manual

PIX 270i User Guide and Technical Information
81
Button Shortcuts
Button Shortcuts
Button Combination Effect
AUDIO + Control Knob rotate Change HP source.
AUDIO + LCD From the Audio view: Solo the highlighted channel in the headphones.
AUDIO + MENU Access the Quick Metadata Screen
LCD + Control Knob press Adjust LCD and button brightness.
Stop + Rew False take. Deletes last take and decrements Take Number.
Stop + Fast Forward
Scene increment. Changes the scene name by increasing it numerically or by alpha charac-
ters.
MENU + FILES Button lock options: Unlock Buttons, Lock Non-Transport Buttons, or Lock All Buttons.
MENU + Control Knob Press
Toggle network grouping. If the unit is grouped, this shortcut will remove it from the group. IF
the unit is not grouped, this shortcut will put it back into the group it was previously in.
Hold LCD Turns off LCD display.
LCD + Encoder Press LCD brightness menu.
LCD + MENU Toggle Focus Assist on LCD display.
LCD + FILES Toggle Exposure Assist on LCD display.
LCD + AUDIO Toggle 1:1 zoom on the LCD display.
FILES + Fast Forward When in Record or Playback, sets a cue marker
FILES + Rew When in Record or Playback, deletes last cue marker
Hold Play Toggle playback looping.
Play + Fast Forward Begin looping between cue points when in loop playback mode
Play + Rew Begin looping of clip when in loop playback mode
# Parameter Name Description Options
15
Version Info
Displays a dialog indicating firmware version and
serial number. This is not a setting, but a helpful refer-
ence.
16
Update Software
Searches attached drives for a .prg firmware file and
begins the firmware update process.
Quick Setup
# Parameter Name Description Options
1
Load Factory Settings
Loads default setup
2
Load Settings From Drive 1
Loads selected setup from setup files saved on Drive
1.
3
Save Settings to Drive 1
Opens dialog to name and save current setup to Drive
1.