Manual
Table Of Contents
- Table of Contents
- Computer System Requirements
- Quick Start Guide
- Front Panel Descriptions
- Input and Output Panel Descriptions
- Back Panel Descriptions
- DIP Switch Options
- Mac OS Installation and Connection
- Windows Installation and Connection
- Inputs
- Outputs and Monitoring
- Stand-Alone Mode
- Locking Sample Rate to External Sources
- Setup Examples
- Block Diagram
- Specifications
- Warranty and Technical Support
- CE Declaration of Conformity
USBPre 2 User Guide and Technical Information
3
Quick Start Guide
Sound Card Connection
Attach the “A” plug of the (supplied) USB cable into an available “A” socket on the computer. Attach 1.
the “B” plug of the USB cable into the “B” socket on the USBPre 2. The USBPre 2’s meter LED’s will il-
luminate sequentially, indicating the USBPre 2 is connected and booting up properly.
Check to see that the operating system has recognized the USBPre 2 and designated the USBPre 2 as the 2.
default sound card. See Installation and Connection.
Connect an audio source. 3. See Inputs.
Connect headphones or other monitoring equipment.4.
Powered Monitors
Headphones
Powered monitors with balanced analog inputs can also be attached to
the XLR outputs on the back panel of the USBPre 2.
Press the Input Select button repeatedly until the proper Input Source LED is illuminated for the input 5.
you will be recording.