Instruction Manual

Sound Oasis®
sleep better. feel better. live better®
8 9
Button Description
Charge
Indicator
Microphone
AUX INPUT
MICRO SD
• Amber LED indicates sound will play from the micro SD card.
• The solid amber light will turn o after about 10 seconds so
the light does not interfere with your sleep.
• Red LED indicates that your BST-400 is charging.
• The red LED will stay lit until your BST-400 is fully charged –
then the LED will dim to a very dim level.
• Insert an optional audio cable with 1/8” (3.5 mm) plugs to
play music from an external device (e.g. iPhone®, iPod®,
MP3 player or CD player) through the unit’s speaker system.
• Your BST-400 comes with a micro SD card preloaded with
Sound Oasis sounds. The micro SD card must be inserted
into this slot in order for you to play the sounds on the micro
SD sound card.
• Y ou may insert new micro SD cards preloaded with other
MP3 sounds or content (see the Using Other Micro SD
Cards section of this manual). Please check
www.soundoasis.com for our download library.
• Your BST-400 can operate as a hands-free speaker for your
smartphone.
• Insert included USB charging cable to charge your BST-400’s
battery or power your BST-400 from a USB source.
Operation
Power Sources
Your BST-400 can operate as a wireless, cord free sound machine or a
wireless Bluetooth speaker because it includes a built-in rechargeable
battery. You can also keep your BST-400 plugged into a USB power
source for continuous operation without recharging.
To Power By Built-In Rechargeable Battery:
1. Prior to using your BST-400 in the wireless, cord free mode for the rst
time, please completely charge the built-in battery.
2. Connect the provided USB Charging Cable to the included AC-charger,
computer or laptop USB port. The unit’s Charge Indicator is brightly
illuminated while charging. It takes about up to 6 hours to charge the
battery. When charging is completed, the Charge Indicator will be very dim.
3. Disconnect the USB Charging Cable and operate your BST-400 as
described below.
4. When the unit is in low power status, the red Charge Indicator and
amber LED will ash. Please recharge the battery of your BST-400 when
this occurs.
Note: When the battery is fully discharged, it needs about 30 minutes of
charging before you can use the unit again.
To Power By USB Charging Cable:
1. Connect the provided USB Charging Cable to the included AC-charger,
computer or laptop USB port.
2. Operate your BST-400 as described below.