Owner's Manual

FULL-RANGE AND WOOFER MOUNTING
T
<
1. Pick a location for mounting your
speakers. Make sure the area is
large enough and deep enough for
the speaker to fit into.
2. Refer to the specifications chart
to determine the proper diameter
hole to cut for your speaker
model.
3. If you'll be using the grille,
use it as a template to mark the
locations for the mounting screws.
Drill the holes with a 3/32" drill
bit.
metal
mesh
grill
T
mounting
screws
speaker
grill ring
Ei1~- baffle
>
V-steel
------ nuts
4. Be sure to observe proper polarity
when connecting the speaker wires
to the speaker. The speaker's
positive terminal is indicated
with a "+" symbol.
5. Place the speaker into the cut-out
and mount it in place with the
supplied screws. If the speaker
grille is to be used, insert
screws into the grille ring holes
and then mount the speaker.
5