Owners Manual 24/96 AD Converter Model 2376 Internal stereo AD converter module
Owners Manual 24/96 AD-Converter Model 2376 Version 1.0 – 6/2003 Designer: Ruben Tilgner This manual contains a description of the product. It in no way represents a guarantee of particular characteristics or results of use. The information in this document has been carefully compiled and verified and, unless otherwise stated or agreed upon, correctly describes the product at the time of packaging with this document.
Contents Safety instructions 4 Product features 4 Packing list 5 Installation – general instructions/adapter plate 5 Installation – step-by-step 6 Connections - inputs and outputs 8 Operation 9 Technical specifications 10 Warranty 11 24/96 AD Converter 2376 3
Safety instructions • Please refer to the safety instructions in the manual of the unit in which you will be installing the converter. • When installing the converter, carefully follow the instructions beginning on page 5. If you are uncertain, please ask a qualified technician or your SPL dealer for assistance. Product features The 24/96 AD Converter module is an optional digital output for compatible SPL devices* with a plug-and-play design for easy installation.
Packing list • 24/96 AD Converter Module • Two each M3 screws, nuts and washers • Adapter plate • Manual Installation General instructions/adapter plate The SPL AD Converter Module Model 2376 (falsch in deutschem Text) is designed strictly as an option for compatible SPL devices. If you are not a technician or do not have sufficient experience with electronic repairs or modifications, we highly recommend that you ask a technician or your SPL dealer for assistance.
Installation Steps 1 & 2 (example shown: Channel One) Step 1: Lay the converter module on the top of the device as illustrated. Loosen the screws and remove the cover of the option slot on the device‘s rear panel. Socket Step 2: Remove the strap holding the cable from the inside of the option slot cover. You may have to (carefully) cut through the drop of silicone.
Installation Steps 3 & 4 (example shown: Channel One) Step 3: Carefully and without twisting it, plug the cable from the device into the slot on the converter module. The plug only fits one way into the slot. Step 4: Without turning it, insert the module into the device (circuit board up) and fasten it using the screws from the option slot cover. Congratulations! Your new converter module is now ready for operation.
Connections Inputs & Outputs Input: SYNC INPUT The SYNC input allows you to feed an external signal into the converter to control the sample rate. Connect an S/P-DIF output from your master source (e.g. sound card) to the SYNC input. The 2376 is not equipped to accept Word Clock for synchronization. The yellow SYNC LOCK LED illuminates when a valid sync signal is present at the SYNC input, and the converter is automatically synchronized to the external sample rate.
Operation Sample Rate Sample rate selection The 24/96 AD converter module allows you to select between the four most common sample rates: 44.1, 48, 88.2 and 96 kHz. Using the 44.1/48 button, select one of the two basic sample rates (out: 44.1 kHz; in: 48 kHz). The x2 button doubles these sample rates to select 88.2 or 96 kHz respectively.
Technical specifications Sample rates: Dynamic range: THD+N (@-1 dBFS/1 kHz): Frequency response (48 kHz): Jitter (average; 700 Hz-100 kHz): 104 dB (A-weighted) 95 dB 10 Hz-22kHz, ±0.2 dB < 300 ps Power consumption +15 V: max. 94 mA Power consumption -15 V: max. 5 mA Dimensions (W x H x D): Weight: 10 44.1, 48, 88.2, 96 kHz 100 x 27 x 76 mm (3.94 x 1.06 x 3 in.) 74 g (2.6 oz.
Warranty SPL products are manufactured using carefully selected components and materials and state-of-the-art production technology. Every SPL product is thorough inspected and tested before leaving the factory, including acoustic and electronic testing. SPL warrantees the SPL 24/96 AD Converter Model 2376 to be free of defects in materials or workmanship for a period of 24 months after the date of purchase.
< Owners Manual 24/96-AD Converter 12 Model 2376 24/96 AD Converter 2376