User Manual

8
USB / SD CARD OPERATION
To insert USB / SD CARD
• To play files in a USB device, leftwards slide the sliding door for USB port and insert the USB
storage device into the USB port. Playback will begin automatically.
• To play files in an SD card, press the release button to remove the front panel, then insert an
SD card into the SD slot. Finally install the front panel to the chassis.
Playback will begin automatically.
Eject USB/SD
To eject a USB device, press the button to stop playback, then remove the USB device.
To eject an SD card, press the button to stop playback, and press the release button on
the front panel to release and remove the front panel, then remove the SD card.
Play/Pause
Press the (play/pause) button to pause or resume playback.
Next/Previous Track
• To play the next track, press the button.
• To play the previous track, press the button.
Fast Forward/Backward
• To fast forward, press and hold the button.
• To fast backward, press and hold the button.
Introduction Scan
Press the INT button to play the first 10 seconds of each track, press again to stop the
introduction scan, and play the current track.
Repeating the same track
Press the RPT button to toggle between RPT ALL (Play all track), RPT FLR (Continuously
repeats alltracks in current folder) and RPT ONE (Continuously repeats current track).
Playing all tracks in random
Press the RDM button to play all tracks in random order, press again to cancel this function.
Track/Folder Navigation
During USB or SD card mode, press the 5/-10 button to go backward 10 tracks.
Press the 6/+10 button to jump forward 10 tracks.
• During USB or SD card mode, press and hold the 5/-10/-DIR button to go back the previous
folder. Press and hold the 6/+10/+DIR button to go to the next folder.
You can repeat this function depending on the number and level of folders.
These buttons have no this function if the USB device or SD card has no folders.
The track will be played immediately when the number is matched.
Select the track or file for playback in MP3 format
a) In playback of files with MP3 format, press the AMS button to enter track search mode, the
TRK0000” will appear on the display.
b) Rotate VOL knob to select the “rst number. Then press the button to move the “rst
number” to the left and enter the next number.
c) Finally press the SEL button to confirm and play the selected track.
If no any operation in 5 seconds,it will play the current track.