User Manual

Change the Source (MODE)
Press the MODE button to switch between RADIO, BT(Bluetooth), USB(with USB device
inserted), SD(with SD card inserted) and AUX-IN(auxiliary input) modes.
The muted state
will be also released when the volume knob is used.
Loudness on/off
Press the LOUD button on the remote control to turn on the loudness to reinforce the output
of bass frequencies, press again to turn it off.
Preset EQ (Equalizer)
Press the EQ button on the front panel or on the remote control to toggle between EQ OFF,
CLASS, ROCK, POP, FLAT.
The charging current consumption is 1 ampere.
Hands-free Microphone
To receive your voice when you calling by using this bluetooth handsfree system.
Aux input connector
The 3.5mm auxiliary input stereo connection is designed for deiveces with 3.5mm line-out or
headphone output.
Reset System (Reset)
The RESET button is used to reset all parameters to factory default settings.
This function may be used when the LCD does not display normally or sound is distorted, or
when any of controls are disabled. To reset your system, use a thin object with a pointed end
to depress the RESET button.
Mute on/off
In power on mode, briefly press the MUTE button to toggle mute on or off.
USB port
The USB port of this car radio is designed for media playback from flash memory devices and
charging for iPhone / andriod mobile phone.
SD card slot
This SD card slot is designed for media playback from SD card.
GENERAL OPERATION (CONT.)
6