User's Manual

7. Skip track forward
8. Skip Track Backwards
9. NFC (Near Field Communication) Pairing position (Optional)
10. Folding Hinges
Setup
Note: Please fully charge the battery before 1
st
time use.
Turn on the Headphones
To turn on the Headphones simply hold the Multifunction Button down for 3 seconds. The LED
Indicator will flash BLUE 3 times, and you’ll hear the message “Power On” through the Headphones.
To turn off the Headphones simply hold the Multifunction Button down for 3 seconds. The LED
Indicator will flash RED 3 times, and you’ll hear the message “Power Off” through the Headphones.
Connecting with Bluetooth
1. Press the Multifunction button to turn the headphones ON
2. Hold down the Multifunction Button for 7 Seconds and the LED light will flash Red and Blue
The Headphones are trying to look for a device to connect to.
3. Go to the Bluetooth option in the settings of your Bluetooth Audio device or smartphone
and in the list of Devices select SB250
4. The Headphones are now ready to use
Connecting with NFC (optional)
To connect the Headphones with NFC enabled devices. Ensure the NFC feature is enabled and simply
touch the right side Headphone area marked NFC against your device for 2 second.
Connecting with Audio Cable
To connect the Headphones to devices that do not support Bluetooth. Plug the provided Audio cable
into the Headphone port on the left and connect the other end of the cable into the audio device.