Installation Instructions

7
Translation using the language selection button
1 Translate the Native Language as the Foreign Language
When you press the power button briefly,
you will hear a beep sound from the earphone.
When you hear a beep, speak Native Language
and press the power button again.
After about 2 ~ 3 seconds, the interpreted
Foreign Language is output through
the earphones and TalkBox speakers.
2 Translate the Foreign Languageas the Native Language
Press and hold the power button (about 2 seconds) to
switch the language from the Native Language to the
Foreign Language. When the language switch is executed,
the voice guidance is output through the talk box speaker.
After the voice guidance, press the power button briefly
and a beep sound will beep through the TalkBox speaker.
When you hear a beep and press the power button to
enter the second language, press the power button when
you are finished entering the second language. After about
2-3 seconds, the second language is output through the
earphones worn so that the other party can hear and talk.
Interpretation errors may occur due to communication
(WiFi, 3G / 4G) issues during simultaneous interpretation.
If such a problem occurs, restart the operation sequence
before the error occurred.
Talk box status indication
1 Battery Level Indicators: A red LED is
displayed when the battery level is low.
2 In Bluetooth pairing standby mode with the mobilephone,
the blue and green LEDs flash alternately and the blue LED
is displayed when connected.
How to Use TalkBox