Owner's Manual
Table Of Contents
- _000_Cover_2.03
- _001_Information_2.04
- _002_Contents_2.03
- 1.0 Introduction_2.04
- 2.0 Getting Started_2.03
- 3.0 Assignable Controls_2.03
- 4.0 Touch Screen_2.03
- 5.0 Inputs And Outputs_2.04
- 6.0 Channels And Busses_2.03
- 7.0 DSP Elements_2.03
- 8.0 Mix Features_2.03
- 9.0 Shows, Cuelist, Snapshots_2.03
- 10.0 Lexicon FX_2.03
- 11.0 Preferences, System, Security_2.03
- 12.0 Oscillator_2.03
- APP01_No Sound_2.03
User Manual
6.2.1: MIX OUTPUTS SETUP
CHANNELS & BUSSES > MIX OUTPUTS > SETUP
6.2.1: CHANNELS & BUSSES > MIX OUTPUTS > OUTPUTS SETUP
Name
Name the selected Mix Bus.
When the Name field is selected, a QWERTY keyboard will appear on the Touch Screen so you can enter the desired
name.
Isolate
Isolate the Mix Bus Master DSP Channel from automation playback.
When a new cue is loaded, this DSP Channel will not be aected and its settings will not be changed. However,
current channel settings are still stored when a cue is stored.
Mix Width
Select Mono or Stereo width for this Mix Bus.
Note, only Mix busses 7-14 can be switched to stereo. Mix busses 1-8 are mono only.
There are various Mix Output-specic options, found via the Touch Screen Main Menu OUTPUTS & DMX
button (when an Output Channel is selected). These offer channel naming, isolate, Pre/Post routing options,
width (stereo/mono) and physical output patching.