Owner's Manual
Table Of Contents
- _000_Cover_2.03
- _001_Information_2.04
- _002_Contents_2.03
- 1.0 Introduction_2.04
- 2.0 Getting Started_2.03
- 3.0 Assignable Controls_2.03
- 4.0 Touch Screen_2.03
- 5.0 Inputs And Outputs_2.04
- 6.0 Channels And Busses_2.03
- 7.0 DSP Elements_2.03
- 8.0 Mix Features_2.03
- 9.0 Shows, Cuelist, Snapshots_2.03
- 10.0 Lexicon FX_2.03
- 11.0 Preferences, System, Security_2.03
- 12.0 Oscillator_2.03
- APP01_No Sound_2.03
User Manual
6.3.1: MATRIX OUTPUTS SETUP
CHANNELS & BUSSES > MATRIX OUTS > SETUP
6.3.1: CHANNELS & BUSSES > MATRIX OUTPUTS > SETUP
Name
Name the selected Matrix Bus.
When the Name field is selected, a QWERTY keyboard will appear on the Touch Screen so you can enter the desired
name.
Isolate
Isolate the Matrix Master DSP Channel from automation playback.
When a new cue is loaded, this channel will not be aected and its setting will not be changed. However, current
channel settings are still stored when a cue is stored.
Matrix Width
Choose Mono or Stereo type for the Matrix Master Output.
Patching
Choose specic analogue or digital outputs for the Master Output Channel.
Touching the value fields will bring up the standard Patching setup on the Touch Screen. Two outputs can be
allocated, with individually patchable left and right connections. For more detail, please see section 5 - Inputs &
Outputs.
There are various Matrix output-specic options, found via the Touch Screen Main Menu OUTPUTS button.
These offer naming, isolate, width, and physical output patching.