Owner's Manual
Table Of Contents
- _000_Cover_2.03
- _001_Information_2.04
- _002_Contents_2.03
- 1.0 Introduction_2.04
- 2.0 Getting Started_2.03
- 3.0 Assignable Controls_2.03
- 4.0 Touch Screen_2.03
- 5.0 Inputs And Outputs_2.04
- 6.0 Channels And Busses_2.03
- 7.0 DSP Elements_2.03
- 8.0 Mix Features_2.03
- 9.0 Shows, Cuelist, Snapshots_2.03
- 10.0 Lexicon FX_2.03
- 11.0 Preferences, System, Security_2.03
- 12.0 Oscillator_2.03
- APP01_No Sound_2.03
User Manual
6.4.1: MAIN MIX OUTPUTS SETUP
CHANNELS & BUSSES > MAIN MIX OUTS > SETUP
6.4.1: CHANNELS & BUSSES > MAIN MIX OUTPUTS > SETUP
Name
Name the selected Main Output Bus.
When the Name field is selected, a QWERTY keyboard will appear on the Touch Screen so you can enter the desired
name.
Isolate
Isolate the Main Output Master DSP channel from automation playback.
When a new cue is loaded, this DSP channel will not be aected and its setting will not be changed. However, current
channel settings are still stored when a cue is stored.
Patching
Choose specic analogue and digital outputs for this DSP Channel.
Touching the value fields will bring up the standard Patching setup on the Touch Screen. Two outputs can be allocat-
ed for both the L&R and the M channels. For more detail, please see section 5 - Inputs & Outputs.
There are various Main Left/RIght and Mono-specic options, found via the Touch Screen Main Menu
OUTPUTS button. These offer naming, isolate, and physical output patching.