Owner's Manual
Table Of Contents
- _000_Cover_2.03
- _001_Information_2.04
- _002_Contents_2.03
- 1.0 Introduction_2.04
- 2.0 Getting Started_2.03
- 3.0 Assignable Controls_2.03
- 4.0 Touch Screen_2.03
- 5.0 Inputs And Outputs_2.04
- 6.0 Channels And Busses_2.03
- 7.0 DSP Elements_2.03
- 8.0 Mix Features_2.03
- 9.0 Shows, Cuelist, Snapshots_2.03
- 10.0 Lexicon FX_2.03
- 11.0 Preferences, System, Security_2.03
- 12.0 Oscillator_2.03
- APP01_No Sound_2.03
User Manual
7.2.2: ACS GATE SECTION
DSP ELEMENTS > ACS > GATE
7.2.2: DSP ELEMENTS > ACS > GATE
DEPTH
Adjust the Depth value of the Gate
The amount of attenuation applied when the gate is closed.
S/C LPF
Adjust the Sidechain Low Pass Filter
This filter cuts high frequencies from the sidechain signal, limiting the frequency range of the signal that is ‘tested’
by the threshold setting.
THRESHOLD
Adjust the threshold of the Gate
The signal level of the sidechain at which the gate is activated.
S/C HPF
Adjust the Sidechain High Pass Filter
This filter cuts out low frequencies, limiting the frequency range of the signal that is ‘tested’ by the threshold
setting.
Gate Status LEDs
Indicate the current operating status of the gate
OPEN (inactive - the gate is passing signal and audio is above the threshold), HOLD (the gate is passing signal but
audio is below the threshold, the gate will close soon), SHUT (audio is below threshold and the gate is closed - the
audio is attenuated according to the DEPTH control value).
GATE On/Off
Switch the gate process On and Off
Pressing and holding the key will activate Interrogate mode for this function (see Mix Features 8.3).