Owner's Manual
Table Of Contents
- _000_Cover_2.03
- _001_Information_2.04
- _002_Contents_2.03
- 1.0 Introduction_2.04
- 2.0 Getting Started_2.03
- 3.0 Assignable Controls_2.03
- 4.0 Touch Screen_2.03
- 5.0 Inputs And Outputs_2.04
- 6.0 Channels And Busses_2.03
- 7.0 DSP Elements_2.03
- 8.0 Mix Features_2.03
- 9.0 Shows, Cuelist, Snapshots_2.03
- 10.0 Lexicon FX_2.03
- 11.0 Preferences, System, Security_2.03
- 12.0 Oscillator_2.03
- APP01_No Sound_2.03
User Manual
7.2.4: ACS EQUALISER SECTION
DSP ELEMENTS > ACS > EQUALISER
7.2.4: DSP ELEMENTS > ACS > EQUALISER
The channel EQ (Equaliser) section is used
for sculpting the tonal (frequency-based)
balance of the signal. The expression EQ is
a four-band type with two (Hi and Lo)
Shelving lters, and two (Hi Mid and Lo Mid)
fully parametric ‘bell’ lters.
HF Level
Adjust the boost/attenuation of the HF shelving lter.
HF FREQ
Adjust the centre frequency of the HF shelving lter.
The filter will boost or cut the signal at this frequency by the amount set by HF Level. The cut-o frequency will
be lower, according to the filter slope.