Owner's Manual
Table Of Contents
- _000_Cover_2.03
- _001_Information_2.04
- _002_Contents_2.03
- 1.0 Introduction_2.04
- 2.0 Getting Started_2.03
- 3.0 Assignable Controls_2.03
- 4.0 Touch Screen_2.03
- 5.0 Inputs And Outputs_2.04
- 6.0 Channels And Busses_2.03
- 7.0 DSP Elements_2.03
- 8.0 Mix Features_2.03
- 9.0 Shows, Cuelist, Snapshots_2.03
- 10.0 Lexicon FX_2.03
- 11.0 Preferences, System, Security_2.03
- 12.0 Oscillator_2.03
- APP01_No Sound_2.03
User Manual
8.6: CLR & ALT+CLR
MIX FEATURES > CLR & ALT+CLR
8.6: MIX FEATURES > CLR & ALT+CLR
CLR + GEQ HI/LO (FADERS)
Reset all Graphic EQ levels to 0dB for the currently selected channel. Only works where GEQ is available (output /
bus channels).
CLR + tOTEM (FADER FOLLOW) button
Reset all contributions and ON status from channels or buses to the selected bus back to factory defaults.
CLR + Mute Master 1-4
While in MUTE setup mode: Clear channel mute assignments to the selected Mute Master.
ALT + CLR Functions
ALT + CLR + SEL
Reset all audio parameters in all like-for-like channels across the whole console (does not affect functions such as
SOLO, bus type, names patching and mute assignment, or preamp gain).
ALT + CLR + EQ
Clear all EQ section parameters across the whole console (on ALL channels).
ALT + CLR + HPF
Reset all High Pass Filters across the whole console to default.
ALT + CLR + COMP
Clear all Compressor section parameters across the whole console.
ALT + CLR + GATE
Clear all GATE section parameters across the whole console.
ALT + CLR + PHASE
Resets the phase to Off across the whole console.
ALT + CLR + LR
Resets all LR routing to Off across the whole console.
ALT + CLR + MONO
Resets all MONO routing to Off across the whole console.
ALT + CLR + Any MIX tOTEM button (MIX 1-14)
Resets all channels’ contributions to all 14 Mix busses to zero. It Does not affect the Auxiliary Mix bus master channels
or master levels.