User's Manual

4.3: AUX SENDS

CHANNELS > AUX SENDS

4.3: AUX SENDS

Ui12, Ui16 User Manual

PRE/POST (Tablet software)

Switch input channel’s Aux contribution between PRE and POST sources

AUX channels are pre-fader by default, meaning the volume faders on the MIX page do not aect the aux levels.

Press the PRE button to change individual channels to POST fader. A long press on the PRE/POST button opens a

dialog for ALL CHANNELS TO PRE or POST.

AUX SEND MUTE (Tablet software)

Mute the input channel’s contribution to this aux mix.

Separate to the normal input channel mute - only aects contribution to the selected aux mix.

M-AUX / COPY MIX

Copy the main mix to this aux mix

This button copies the fader positions from the MIX page and moves all aux send faders to the same position on

the AUX SENDS page. This is a handy starting point for an AUX mix rather than starting from all faders down.

You can press this button at any time if you want your monitor mix fader positions to resemble the MAIN mix. For

safety, user conﬁrmation is required.