User's Manual

Ui12, Ui16 User Manual
10.1.2: WI-FI
SETTINGS > NETWORK CONFIG > WI-FI
10.1.2: Wi-FI SETTINGS
Use the Save/Update button to save Wi-Fi settings.
IMPORTANT: You must recycle the Ui power (turn the unit off and on) for settings to take effect.
The Ui can connect to an existing Wi-Fi network / Hotspot, and you can access the control software via
theunit’sIPnumber(showninSettings>Network).SelecttheWi-FiCongurationmenuinNetwork
CongtoedittheWi-Fisettings.
Wi-Fi
Enabled / Disabled
Enable or disable the Wi-Fi connection.
SSID (Service Set Identier)
Text Entry
This is the name of the network you wish to connect to.
Password
Text Entry
This is the password for the network you wish to connect to.
Address
DHCP / Manual
You can choose dynamic IP allocation, in which case the Ui will automatically allocate an IP, Netmask, and Gateway.
IfyouchooseManualIPallocation,youwillneedtocompletetheseeldsyourself.Pleaserefertoyournetwork
administrator for manual IP allocation.