User's Manual

Ui12, Ui16 User Manual
APPENDIX 03: F/W UPDATE
Firmware Update Build 1.0.5440
APP03: F/W UPDATE
LOCAL AUX CONTROL (SOFT ACCESS ENABLER)
AlocalclientsoftaccesseablerforAUXcontrolisprovidedfornonloggedinusers.Theusercandene
which AUX’s they want to control if the master pass user has allowed access for either AUX LEVELS or
AUX PROCESSING.
Resetting a lost MASTER PASSWORD:
ToresetalostmasterpasswordtheusercanconnectaUSBdrivewithanemptylenamedmasterpass.txt
(top directory) and power cycle the unit with the RESET button on the side of the unit depressed. Hold the
RESETbuttondpressedstateuntiltheblueWiFiledonthetoppannelstopsashing.TheMasterPassword
will be reset.
11) Local user GUI presets
Local client side user settings can now be save/loaded as presets to connected media. This allows users
tochangedeviceswithease,takingtheirpredenedlocaluserpresetswiththem,withouthavingtosetup
their GUI every time they change devices!
Local client side GUI settings can be found in the SETTINGS-->SETTINGS tab page, under LOCAL. GUI
options relating to a users client side application such as Pinning the slide out panel, Hiding the Comp/
Gate,1or2ngerscroll,MOREMEportraitmode,etccannowbesavedasaLOCALSETTINGSPRESET.
To load/save/rename/delete LOCAL SETTINGS PRESETS:
- Go to the SETTINGS-->SETTINGS tab page
- Scroll down and click/tap the LOCAL SETTINGS PRESETS button
- Use the PRESETS manager to LOAD/SAVE/RENAME/DELETE your LOCAL SETTINGS PRESETS to
connected USB media
12) Local user GUI reset to default
Local client side user settings can now be reset to default values.
To reset LOCAL SETTINGS to default value:
- Go to the SETTINGS-->SETTINGS tab page
- Scroll down and click/tap the RESET LOCAL SETTINGS button
- Local GUI settings will now be reset to default values and the GUI will be restarted automatically
13) Key Command (tablet version): “M” mutes AUX\FX SENDS if you are on the AUX\FX SENDS
page
The key command “M” is now recognised when the user is on the AUX or FX Sends page and triggers the
Aux send mute or FX send mute respectively.