Operation Manual

5
As the colours of the wires in the mains lead may not correspond
with the coloured markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured Green and Yellow must be connected
to the terminal in the plug which is marked with the letter E
or by the earth / ground symbol:
The wire which is coloured Blue or White must be connected
to the terminal in the plug which is marked with the letter N.
The wire which is coloured Brown or Black must be connected
to the terminal in the plug which is marked with the letter L.
Ensure that these colour codings are followed carefully in
the event of the plug being changed.
Replacement Part No: FJ8016 (UK) : FJ8017 (EU) : FJ8018 (US &
CAN)
• Do not install near any heat sources such as radiators, heat
resistors, stoves, or other apparatus (including amplifiers)
that produce heat.
• Do not use this apparatus near water. The apparatus must
not be exposed to dripping or splashing. Objects containing
liquid must not be placed on the apparatus.
• The disconnect device is the mains plug or the appliance
connector: either one must remain accessible so as to be
readily operable in use.
• Do not defeat the safety purpose of the polarized or grounding
type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs and convenience receptacles.
• Only use cables and hardware specified by the manufacturer.