Operation Manual

7
Introduction
Firstly we’d like to thank you for choosing the Soundcraft GigRac 1000st.
We hope you have many happy years together!
Features
8 Microphone Inputs
48V Phantom Power for condenser microphones (Inputs 1-4 only)
PAD buttons for controlling loud input signals (Inputs 1-4 only)
4 Stereo inputs
Treble, Mid and Bass controls
Pan/Bal controls
Individual volume controls on each channel for Monitor level.
Individual volume controls on each channel for Main level.
Individual send controls for GiGFX on each channel
2 x 7 Band Graphic Equaliser
10 x Digital Effects (24 Bit/48 kHz)
Record Output
Playback Input
FX bypass switch
FX bus output socket
Submix input
2 x Amplifier ‘Clip’ warning lights
2 x 10 segment LED output level meters
The GigRac case.
Your GigRac is cased in a structural foam copolymer polypropylene resin,
which gives an optimum combination of strength and impact resistance.
This material also helps to keep the shell in good condition as it very
resistant to dents and scratches.
The nature of the moulding process leaves the irregular streaky surface
finish that gives the GigRac its tough and unique look.
Amplifier Power Ratings
GigRac 1000st
2 x 500W @ 4 Ohms.
2 x 300W @ 8 Ohms.