Operation Manual

(6) Bass Contr(6) Bass Contr

(6) Bass Contr

olol

The Bass Control is set at 80Hz and allows you to either add or remove

the low frequency content of the signal by 15dB.

Rotating the control clockwise will ’boost’ the signal, rotating the control

anticlockwise will ‘cut’ the signal.

This control is useful for adding more ‘thump’ to low frequency signals

such as bass guitars and kick drums but can also be used to remove

unwanted rumble or boominess from signals such as vocal or instrument

microphones.

(7) T(7) T

(7) T

eble Contreble Contr

eble Contr

olol

The Treble Control is set at 12kHz and allows you to either add or remove

the high frequency content of the signal by 15dB.

Rotating the control clockwise will ‘boost’ the signal, rotating the control

anticlockwise will ‘cut’ the signal.

This control is useful for adding ‘crispness’ or ‘sizzle’ to signals with a lot

of high frequency content such as guitars and cymbals but can also be

used to remove unwanted sibilance from signals such as vocals.